![Step 1](https://pierprotector.com/wp-content/uploads/2018/11/Step-1-1024x1024.png)
STEP 1
Determine how long to pre-cut your wraps by measuring the pile diameter, multiplying by pi (3.14), and add 6 inches for overlapping.
![Step 2](https://pierprotector.com/wp-content/uploads/2018/11/Step-2.png)
STEP 2
Remove any attached organisms and clean surface. Not necessary on new construction.
![Step 3](https://pierprotector.com/wp-content/uploads/2018/11/Step-3.png)
STEP 3
Wrap with black stretch wrap. Multiple wraps are done top to bottom. A minimum of 3 layers is recommended.
![Step 5](https://pierprotector.com/wp-content/uploads/2018/11/Step-5.png)
STEP 4
Attach one side of the material with 3-4 nails evenly spaced.
![Step 4](https://pierprotector.com/wp-content/uploads/2018/11/Step-4.png)
STEP 5
Wrap the material around the pile and pull tight.
![Step 6](https://pierprotector.com/wp-content/uploads/2018/11/Step-6.png)
STEP 6
While keeping the material tight against the pile, place nails every 3-6 inches along the seam.